Rox Pivot Riser 2"(#1R-P2PPA)

2" Pivoting riser for 1 1/8" stem and 1 1/8 Handlebars. Clear anodized

• Lifetime Warranty
• Made in the USA
• 2" (51mm) Center-to-Center Rise
• Pivots Backward/Forward based on Rider Preference
• 1 1/8" Stem (28mm)
• Accepts 1 1/8" Handlebar (28mm)
• Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers.
• These risers will mount on virtually any machine that has a solid 1 1/8" tubular handlebar and open mounting area.

For the California 1400 models and Eldorado with 1 1/8" Bars cable rerouting is necessary. Removing of zip ties or cable clamp is probably recommended.

For 1200 Stelvio Models, it may be necessary to re-route cables under the tank as well as removing some cable clamps or ties. 

m

inor cable rerouting is necessary to use our 2" risers with the stock cables. Customers have reported that extra cable length can be found by lifting the gas tank and threading the cables more forward. Removing zip ties / cable clamps is also recommended.